Table of Contents
Advertisement
Operating Modes and Character Recognition
The following illustration shows the setting on the 10-pin DIL switch of the MD2 for
the "Test f
Note
Test operating mode "Test f
dedicated line. Use operating mode "Test f
measurements of the level.
6NH7811-0AA22
4-16
" operating mode.
baud
OFF
ON
Fig. 4-11 DIL switch setting for the
"Test f
" is not suitable for measuring the level over the
baud
1 2 3 4
5 6 7 8 9 10
" operating mode
baud
" for making exact
H constant
© Siemens AG 2002 All Rights Reserved
MD2 Modem (07/2002)
Advertisement
Chapters
Table of Contents
