Table of Contents
Advertisement
Connecting the Optional Touch Screen
Your LCD Monitor has an optional touch screen feature. If your LCD monitor has this feature, connect the LCD
Monitor's PS/2 connector to your PC's 9-pin RS232 serial port to enable the touch screen.
1. Install the Touch Screen Drivers to your PC.
2. Following the Touch Screen driver guide to align your touch screen positioning.
Power Management System
The LCD Monitor complies with the VESA DPMS (version 1.0p) power management proposal.
The VESA DPMS proposal provides four phases of power saving modes by detecting the
horizontal or vertical sync signal. When the LCD Monitor is in power saving mode or detects an
incorrect timing, the Monitor screen will go blank, and the power LED indicator will start to blink.
Planar User's Manual
5
Advertisement
Table of Contents
