Siemens ET 200SP Manual page 20

Technical specifications
6.1 Technical specifications
Triac outputs
Size of motor starter according to NEMA, max.
Cable length
Shielded, max.
Unshielded, max.
Isochronous mode
Isochronous mode (application synchronized up to
terminal)
Interrupts/diagnostics/status information
Substitute values can be applied
Interrupts
Diagnostics interrupt
Diagnostics alarms
Diagnostics
Monitoring of supply voltage
Diagnostics indicator LED
Monitoring of the supply voltage (PWR LED)
Channel status display
For module diagnostics
Electrical isolation
Electrical isolation of channels
Between the channels
Between the channels and the backplane bus
Between the channels and the supply voltage of
the electronics
Insulation
Insulation tested with
Dimensions
Width
Weights
Weight, approx.
Dimension drawing
See the manual ET 200SP BaseUnits
(http://support.automation.siemens.com/WW/view/en/59753521)
20
5
1000 m
600 m
No
Yes
No
No
No
Yes; green PWR LED
Yes; green LED
Yes; green/red DIAG LED
No
Yes
No
DC 2545 V 2 s (routine test)
20 mm
50 g
DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)
6ES7132-6FD00-0BB1
Manual, 03/2015, A5E32043575-AB