Inspect Cassette Sensor Mode ([3] Key) : Perform At Production - Brother PT-H100 Service Manual

3.5 Inspect Cassette Sensor Mode ([3] key) : Perform at
Production
Press the [ENTER] key or [3] key at the state of
will be displayed.
Press the [ENTER] key at the state of
displayed.
■ Outline of "Inspect Cassette Sensor mode"
- Check the pressing of the four sensor switches (cassette sensor 1~3, cutter
sensor).
- Press the 1, 2, 3 and the cutter sensor in this order.
- Press the sensor by itself. If the sensor is pressed with others, the NG is judged.
- The pressing order of the cassette sensor is as shown below.
Locking boss
- Press the [ENTER] key in the middle of inspection
and <Figure
Shift to <Figure
When the sensor except 1 is pushed at the state of
Figure 3.5-1 Inspect Cassette Mode Indication
3
3.5-1> will be displayed.
C S T 1
Figure 3.5-2
3.5-3> by pressing / releasing the cassette sensor 1.
C S T 2
Figure 3.5-3
<Figure
C S T
<Figure 3.5-1>, and
2
←
Cassette sensor position
1
(<Figure 3.5-2>~<Figure
<Figure
III - 34
3.4-2>, and <Figure
<Figure 3.5-2> will be
3.5-5>),
3.5-6> will be displayed.
3.5-1>