Brother PT-H100 Service Manual page 58

Shift to <Figure 3.5-4> by pressing / releasing the cassette sensor 2.
In the same way, press / release the cassette sensor 3 and the cutter sensor in this
order.
When the NG is judged in any sensor,
next sensor inspection, if the correct sensor is pressed while
displayed.
(Shift to <Figure 3.5-5> by pressing / releasing cassette sensor 3 at the state of
<Figure 3.5-4>)
Shift to <Figure 3.5-7> after completion of pressing / releasing cutter sensor.
Figure 3.5-6 NG Judgment Display Example
If <Figure 3.5-7> is displayed, set the "12 mm laminate black ink ribbon TZe tape
cassette" and close the cover.
After closing the cover, print
will be displayed while printing.
C S T 3
Figure 3.5-4
C S T C
Figure 3.5-5
<Figure
C S T 1 X
<Figure 3.5-8> by pressing [ENTER] key.
S E T 1 2 m m T Z e
Figure 3.5-7 Cassette Set Indication
III - 35
3.5-6> will be displayed. Shift to the
<Figure 3.5-6> is
<Figure 3.5-9>