Operation In Static And Dynamic Mode - Siemens SIMATIC RF300 System Manual

RF300 system planning
4.1 Fundamentals of application planning
4.1.6

Operation in static and dynamic mode

Operation in static mode
If working in static mode, the transponder can be operated up to the limit distance (S
transponder must then be positioned exactly over the reader:
Figure 4-2
Operation in dynamic mode
When working in dynamic mode, the transponder moves past the reader. The transponder
can be used as soon as the intersection (SP) of the transponder enters the circle of the
transmission window. In dynamic mode, the operating distance (S
Figure 4-3
28
Operation in static mode
Operation in dynamic mode
) is of primary importance.
a
System Manual, 09/2007, J31069 D0166-U001-A5-7618
). The
g
SIMATIC RF300