Cisco ON100 Quick Start Manual page 8

Status LEDs
1 Steady Amber
STATUS
2 Off
1 2
1 Steady Amber
STATUS
2 Blinking Amber
1 2
1 Steady Amber
STATUS
2 Off
1 2
Software Download and Upgrade
1 Blinking Red
STATUS
2 Blinking Red
1 2
1 Steady Green
STATUS
2 Steady Amber
1 2
Restart
1 Blinking Green
STATUS
2 Blinking Amber
1 2
Normal Operation / Ready for Activation
1 Steady Green
STATUS
2 Off
1 2
8
Description
Starting software initialization.
Acquiring an IP address.
If this pattern displays for more than two
minutes, it indicates that the OnPlus
Network Agent has failed to obtain an IP
address.
If a static IP is configured, this pattern is
never displayed for more than 10
seconds.
Completing software initialization.
Downloading and installing the base
software image (requires Internet
connection).
You will only see this pattern prior to
activation (during out-of-box installation)
or after a factory reset.
Upgrading software (requires Internet
connection).
Restarting the OnPlus Network Agent.
The OnPlus Network Agent restarts after
a normal reset, factory reset, or software
upgrade.
Operating normally or ready for
activation.
Cisco ON100 Network Agent Quick Start Guide