Carrier 38MBR series Service Manual page 48

DISASSEMBLY INSTRUCTIONS SIZE 48 (CONT)
4 Compressor
6) Disconnect the grounding wire
(yellow-green) after removal
of the big handle.
7) Remove the PCB board.
How to remove the compressor.
1) Complete steps 5 - 6 in
section and section 2.
2) Extract the refrigerant gas.
3) Remove the sound insultation
material and crankcase
heating cable.
4) Remove the compressor
terminal cover and
disconnect the crankcase
electric heater wires and
compressor from the
terminal.
5) Remove the discharge pipe
and suction pipe with a
burner.
6) Remove the hex nuts and
washers securing the
compressor to the bottom
plate.
7) Lift the compressor.
48