Getting Started; Setting Up The Router - Cradlepoint MBR1200B Quick Start Manual

Quick Start Guide / MBR1200B
HARDWARE
LED Indicators
Power
Express Card Modem Status
+ Green = On
+ Solid (green) = Connected
+ No light = Not
+ Blinking (green) =
receiving power
Connecting
LAN
WPS
+ Solid = Connected
+ Solid = Active
+ Blinking = Traffic activity
+ Blinking = Setting
in progress
WAN
WiFi 2.4GHZ
+ Solid (green) = Connected
+ Solid = On
+ Blinking (green) = Traffic
activity
+ Blinking = Traffic activity
USB Type A Modem Status
3G/4G Modem Signal
Strength
+ Solid (green) = Connected
+ Blinking = 1/2 bar
+ Blinking (green) =
Connecting
2
Failover LED
+ Off = Primary WAN
operating normally
+ Solid (green) = Secondary
WAN is in use
Attention LED

GETTING STARTED

+ Amber = Attention. Check
for courtesy message.

Setting Up the Router

+ No Light = Issues taken
care of.
+ Red = Device booting or
+
critical system error such
as "No WAN is available."
+
Plug the power supply into an electrical outlet, connect the power supply
to the MBR1200B and switch the power to 'on'.
Connect a USB or Express Card Wireless Broadband Data Modem with
Active Subscription, or a Cable, DSL, Satellite, T1, T3, Ethernet Modem.
©Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com