Pitney Bowes DM200I User Manual

DM200i™, DM300i™, DM400i™, DM300L™, DM400L™ Mailing Machines
Get new postage rates today,
automatically switch on January 4!
Your meter will continue to use current rates until January 4, 2010. The new rates you download today
will automatically activate on January 4.
Prepare to get new rates
1
As you normally would for a postage refill,
•
Connect your meter to an analog phone line that is
not shared by any other machine (such as a Fax).
Connect to Pitney Bowes
2
From the Ready screen,
•
Press the Options key.
•
Select Setup Menu.
•
Select Updates and Add-Ons.
•
Select IntelliLink - Get Update.
(A series of communications messages will appear on the screen.)
Get new rates
3
When the screen displays "Update Available",
•
Press the Yes key.
(A series of communications messages will appear on the screen. This will take about 3 minutes.)
If you are prompted to update your presets, it is suggested that you DO NOT update your presets
4
at this time. Instead, after your rate update is complete, use our
for setting up presets on the reverse side.
CONGRATULATIONS!
5
You will know the rates have successfully
downloaded when your system returns to
the Ready screen.
New rates will take effect on January 4.
Continue on reverse side.
NEW & IMPROVED
New rate shown below will
appear on January 4, 2010
0 lb 1.0 oz
$0.44
Jan 4.2010
Class: 1stReg Letter
Ready to Print
Ready screen when Control Center
is connected to Mailing
Machine Base
RCG8XX
method
$0.00
Jan 4.2010
Class: XXXX
OR
Printing Not Available
Ready screen when Control Center
is not connected to Mailing
Machine Base