Pitney Bowes ADDRESSRIGHT DA950 Operator's Manual page 81

Using the
Main Menu
(continued)
10. Purge Print Head
This menu item is used to clean the ink jet cartridge
nozzles. The purge process fires all the ink jet nozzles
onto a piece of media to dislodge and clear any dried ink
on the print nozzles. Often this will return the print quality
to a normal level.
Once the purge is started, the – button may be pressed
to stop the cycle.
For instructions how to use the menus and select an op-
tion, refer to page A-4.
11. Reset Ink Counter
The printer calculates the amount of ink used by each
of the Print Cartridges. When the On-Line (green LED)
starts to blink it is a signal that one or more of the Print
Cartridges is less than 5% full and it must be changed
relatively soon. After new Print Cartridges are installed
the Ink Count needs to be reset to stop the green LED
from blinking.
This item displays the estimated amount of ink remaining
in the print cartridge(s).
Press the + plus or – minus button to scroll through the
print cartridges 2, 3, 4, 5, and 6. When the desired Print
Cartridge number is displayed, press the Enter button to
reset the percent ink to 100%.
Estimated amount of ink remaining
Press Enter when a new cartridge is
installed to reset percentage to 100%
For instructions how to use the menus and select an op-
tion, refer to page A-4.
Printer Menus
5% INK IN HEAD
ENTER TO RESET
Print Cartridge No.
1 +
–
Press + or – to scroll Print
Cartridge Nos. up or down
A-15