LitePro 580 User's Guide
Downloaded From projector-manual.com Boxlight Manuals
Do not drop the lamp module or touch the glass
bulb! The glass can shatter and cause injury.
4. Fit the new lamp in place.
• Align the lamp in the correct direction.
• Lightly press on it until it touches bottom.
• Tighten the two screws.
5. Replace the lamp cover.
• Reposition the cover in place.
• Replace the screws and tighten them.
Never operate the LitePro with the lamp cover open
or removed. This disrupts the airflow and causes the
LitePro to overheat.
Maintenance
51