InFocus LitePro 580 Manual page 47

Using LP Utilities
44
Downloaded From projector-manual.com Boxlight Manuals
Macros and templates
A sequence of keystrokes assigned to a button is called a macro. A set
of macros is stored in a file called a template. You can create as many
templates as you like: one for each presentation software application,
for example.
The first time you launch LP Remote Programmer, it opens the
default template. In the illustration on the previous page, a template
named REMOTDEF.TPT is opened.
Programming a button
There are two ways to assign a macro to a button: you can record it or
type it. Recording keystrokes is usually preferable. However, if the
macro includes control keys (CTRL, ALT, SHIFT, etc.), you should
type the characters and codes in the text box.
To record a macro:
1. Click the button you want to program. (You can also press Enter
on an IBM-compatible computer or Select on a Macintosh to
select a button to program.)
• The text box at the top of the window displays the keystrokes
that are already assigned to the button.
2. Click the Record button to start recording. (You can also press the
Scroll Lock key on an IBM-compatible computer to start record-
ing.)
3. Type the keystrokes you want to assign to the button, up to 32
keystrokes.
• If you are using an IBM-compatible computer and the
keystroke sequence includes the Scroll Lock key, click the
Record button to stop recording, type [SC] (including the
brackets), then click Record to start recording again.
4. Click "OK" to stop recording.
5. Repeat steps 1-4 for the other buttons.
6. Save the template by choosing "Save" from the File menu.
LitePro 580 User's Guide