InFocus LitePro 580 Manual page 39

Using LP Utilities
36
Downloaded From projector-manual.com Boxlight Manuals
Using the control icons
The LP-Link function controls are the same as those on the projector
and the remote. Select a button to change its setting. Select and hold
down the mouse button to increase or decrease values. A list of the
controls follows:
Icon Command
Standby
Sync (-)
Sync (+)
Bright (-)
Bright (+)
Volume -
Volume (+)
Custom
Source
Freeze
Mute
LP-Link control icons
Function
Turns projector lamp on and off.
(If the LitePro is in standby mode,
this is the only icon that is
displayed.)
Adjusts a flickering or blurred
image. Synchronizes the projector
to the computer or video input
signals.
Adjusts a flickering or blurred
image. Synchronizes the projector
to the computer or video input
signals.
Decreases the brightness of the
image.
Increases the brightness of the
image.
Decreases the volume.
Increases the volume.
Carries out a function you have
assigned with the Custom Key
menu.
Selects either a computer or a
video device as the source of the
signal to be projected.
Freezes the image. To cancel, click
the icon again.
Shuts off the audio. To cancel,
click the icon again.
LitePro 580 User's Guide