Siemens SCALANCE XP-200 Operating Instructions Manual page 87

ATEX (explosion protection directive)
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that
the associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subasseblies/modules in a Zone 2 Hazardous
Area".
You will find this document
• on the data medium that ships with some devices.
• on the Internet pages of Siemens Industry Online Support
Enter the document identification number C234 as the search term.
The SIMATIC NET products meet the requirements of the EC directive 94/9/EC "Equipment
and Protective Devices for Use in Potentially Explosive Atmospheres". and as of 20.04.2016
the EC directive 2014/34/EU.
ATEX classification:
II 3 G Ex nA IIC T4 Gc
KEMA 07ATEX0145 X
The products meet the requirements of the following standards:
● EN 60079-15 (electrical apparatus for potentially explosive atmospheres; Type of
protection "n")
● EN 60079-0 (Explosive atmospheres - Part 0: Equipment - General requirements)
You will find the current versions of the standards in the currently valid ATEX certificates.
ATEX - use in hazardous areas Zone 2 / Zone 22
This section contains important information on installation in hazardous areas Zone 2 / Zone
22
You will find the EC Type Examination Certificate with the approved products on the Internet
with the following link: Service & Support
(http://support.automation.siemens.com/WW/view/de/71748103)
ATEX classification
II 3 G Ex nA IIC T4 Gc
II 3 D Ex tc IIIC T90°C Dc IP67
DEKRA 12 ATEX 0220 X
The products meet the requirements of the following standards:
● EN 60079-15: Electrical apparatus for explosive gas atmospheres, Part 15: Type of
protection "n"
● EN 60079-31: Explosive atmospheres, Equipment dust ignition protection by enclosure "t"
SCALANCE XP-200
Operating Instructions, 05/2016, C79000-G8976-C428-01
WARNING
(http://support.automation.siemens.com/WW/view/en).
Approvals
87