Installation - D-Link DGE-530T Quick Install Manual

Hide thumbs Also See for DGE-530T:

Installation

Note: Install the drivers before installing the adapter into your

computer.

Turn on your computer and Insert the D-Link DGE-530T Driver CD

in the CD-ROM drive. The step-by-step instructions that follow are

shown in Windows

XP. The steps and screens are similar for the

other Windows operating systems.

If the CD Autorun function does not automatically start on your

computer, go to Start > Run. In the run command box type

"D:\DGE530T.exe" (where D: represents the drive letter of your

CD-ROM drive).

Drivers for non-Windows operating systems are located on the

D-Link CD.

When the autorun screen appears, click Install Drivers (this will

launch the Network Utility program and install the drivers). An

Installation Wizard will guide you through the process, no matter

which operating you are running. Your DGE-530T will be installed

successfully in just a few moments, allowing you to enjoy the many

advantages of joining an Ethernet LAN.

D-Link DGE-530T Quick Install Guide

Table of Contents