Installation Considerations - D-Link Air DWL-520 Manual

Wireless Basics (continued)
The DWL-520 is compatible with 802.11b wireless products, which include:
!
D-Link Air DWL-650,D-Link AirPlus DWL-650+
2.4GHz Wireless Cardbus Adapter used with laptop computers
!
D-Link AirPlus DWL-520+
2.4GHz Wireless PCI cards used with desktop computers
!
D-Link AirPlus DWL-900AP+
Enhanced 2.4GHz Wireless Access Point
!
D-Link AirPlus DI-614+, DI-714P+
Enhanced 2.4GHz Wireless Broadband Routers
Standards-Based Technology
Based on the IEEE 802.11b standard, the DWL-520 is also interoperable with existing
compatible 2.4GHz wireless technology with data transfer speeds of up to 11Mbps.

Installation Considerations

The D-Link Air DWL-520 lets you access your network, using a wireless connection,
from virtually anywhere within its operating range. Keep in mind, however, that the number,
thickness and location of walls, ceilings, or other objects that the wireless signals must
pass through, may limit the range. Typical ranges vary depending on the types of materials
and background RF (radio frequency) noise in your home or business. The key to
maximizing wireless range is to follow these basic guidelines:
1 Keep the number of walls and ceilings between the DWL-520 and
other network devices to a minimum - each wall or ceiling can reduce
your D-Link Air Wireless product's range from 3-90 feet (1-30 meters.)
Position your devices so that the number of walls or ceilings is minimized.
2
Be aware of the direct line between network devices. A wall that is 1.5 feet thick
(.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At
a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so
that the signal will travel straight through a wall or ceiling (instead of at an
angle) for better reception.
3
Building Materials can impede the wireless signal - a solid metal door or aluminum
studs may have a negative effect on range. Try to position wireless devices and
computers with wireless adapters so that the signal passes through drywall or
open doorways and not other materials.
4
Keep your product away (at least 3-6 feet or 1-2 meters) from electrical
devices or appliances that generate RF noise.
7