System Requirements; Hardware Installation - D-Link WMP-A12 User Manual

System Requirements

"
"
"
"
"

Hardware Installation

Follow these steps to install the 802.11a PCI Card in a computer's PCI slot:
1.
2.
3.
4.
5.
6.
7.
8.
9.
A computer that meets the following specifications:
-Windows 2000,Windows ME, or Windows 98SE
PCI expansion slot
At least 64 MB of memory
A 300 MHz processor or higher
At least one other IEEE 802.11a-compliant device
Turn off your computer and unplug its power cord from the wall outlet for
safety purposes.
Remove the computer cover.
Locate an unused PCI slot and refer to your PC 's manual for
instructions on how to remove the plate that covers the slot (if
applicable).
Align the Harmony 802.11a PCI Card over the empty slot.
Firmly insert the card into the slot, as illustrated below.
Secure the card's metal bracket to the computer following the directions
provided in your PC's manual.
Replace the computer cover.
Plug the computer's power cord back into the wall outlet.
Place the antenna with the longer cable on top of your desk, computer,
or monitor.