Cable Connecting Draft; Trouble Shooting; Technical Specification - Elan PSD-67-IP-WIRELESS User Manual

11. Cable connecting Draft

12. Trouble Shooting

Problem
• Check the power source plug is in normal or not
Can not turn on the light • Check the switch of the lights is off or on
• Check the fuse if in normal
• Check the DMX cable is connect to the lights or not
• Check the DMX512 controller work in normal or not
DMX can not control it
• Check the DMX cable is normal or not
• Check if the lights is in DMX mode (A001)
14
Checking Way
• When connect to the electricity, did the led flash one time? If so, the power
source is normal; If not, please check if the switch and the transformer has
power out
• Check if the power input of the IC board is normal
Display not bright
• Check if the cable connect to the display loose
• Change the main board to see if it is normal.
• Change the display
• Check if the power input of the IC board is normal
• Check if the cable connect to the display loose
LED not light
• Change the main board to see if it is normal.
• Change the display
• LED is connected by leds in series first, then connect parallel, so please
check if the leds is loose
• Use the multimeter to check if the led is bright or not, of not, please change
the led
Some of the LED not light
• check whether current limiting resistor is normal or not
• Check constant current IC is normal or not (compared with the normal IC)
• Check the switch of this color is normal or not
Single color leds always bright/
not bright
• Change the IC control board
Note: only professional persons can do as above.
13. Technical Specifications
• Input voltage: AC 100V-264V/47-63HZ
• Charger output voltage: DC29.4V 2A
• Charging time: about 4 hours
• Consume: 84W
• Lamp Type: LED(12W)
• Lamp Spec: 6-in-1 LED (7PCS)
• Life span: 50000-100000hours
• Constant current driver: 400mA
• PWM Dimmer: >> 400HZ (16666 steps)
• Running hours (with full power): full bri-
ghtness (+/- 6 hours); Gradual change (+/-
10 hours);
• Control Signal: wire/wireless DMX512, auto
run
• Control mode: stand alone/ Master and
slave
• DMX channels: 6/7/8/11 CH
• Color effect: R, G, B, A,W, UV mixing
• Beam angle: 25º, 45º optional
• Function Effect: dimmer, strobe, eotic, gra-
dual change, sound activated
• Cooling mode: fan cooling
• Protection rating: IP65
• Anti-electricity intension: 1.5KV
• Insulation Resistance: >2MΩ
• Size: 287.3 x 270.1 x 166.0mm
• Net Weight: 5.2 Kg
15