Memorizing Stations; Recalling Memorized Stations - Pioneer VSX-D510 Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for VSX-D510:
Table of Contents

Advertisement

Memorizing Stations

If you often listen to a particular radio station, it's
convenient to have the receiver store the frequency for
easy recall whenever you want to listen to that station.
This saves the effort of manually tuning in each time.
The VSX-D510 can memorize up to 30 stations, stored
in three banks, or classes, (A, B and C) of 10 stations
each. When memorizing FM frequencies, the receiver
also stores the MPX setting (auto stereo or mono, see
p.26). The process for memorizing stations is only
possible from the controls on the front panel of the
receiver.
4
3
2
1 Tune to a station you want to memorize.
See Finding a Station and Tuning Directly to a
Station, on pages 26 and this page, for more on how
to do this.
2 Press
.
MEMORY
The display shows a blinking memory class.
3 Press
to select one of the three
CLASS
classes.
Repeatedly pressing this button cycles through the
three available classes, A, B and C.
4 Press
STATION +/–
station memory number.
Pressing these buttons repeatedly cycles through the
10 available station memories in each class.
After choosing the location you want, the preset class
and number blink for about 5 seconds and the
receiver stores the station.
Repeat steps 1 to 4 to memorize up to 30 stations.
TUNED
SP A
STEREO
to select the desired

Recalling Memorized Stations

Having memorized up to 30 stations (see this page for
how to do this), preset stations can be easily recalled.
DVD/LD TV/SAT VCR/DVR
1
RECEIVER TUNER
2
DSP MODE MIDNIGHT 5.1CH
1
CHANNEL
TEST
SELECT
TONE
5
CHANNEL
LEVEL
9
FUNC
VOL
ST
MENU
2
SOURCE CLASS
D.ACCESS
1
¡
2 3
1 Press the
MULTI CONTROL TUNER
the remote control or turn the
on the receiver to select the tuner
DIAL
mode.
2 Press
to select the class in which the
CLASS
station is stored.
Repeatedly pressing this button cycles through the
three available classes, A, B and C.
3 Use the
STATION +/–
station memory in which the station is
stored.
Alternatively, recall the station memory using the
number buttons on the remote control.
MEMO:
• If the receiver is left disconnected from the AC power
outlet for a lengthy period, the station memories will
be lost and will have to be reprogrammed.
Using the Tuner
CD
CD-R/
TV CONT
TAPE/MD
2
3
4
3
SIGNAL
ATT
SELECT
6
7
8
EFFECT
0
ENTER
10
DISC
CH
TV CONTROL
VOL
FQ
ST
ENTER
TOP
MENU
FQ
3
MPX
BAND
7
8
3
CHANNEL
4
¢
1
button on
MULTIJOG
buttons to select the
27
En

Advertisement

Table of Contents
loading

Table of Contents