Aus Electronics Direct AA6000 User Manual

Digital to analog audio decoder

Advertisement

Digital to Analog
Audio Decoder
USER Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AA6000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Aus Electronics Direct AA6000

  • Page 1 Digital to Analog Audio Decoder USER Manual...
  • Page 2 Table of Contents 1.0 Introduction 2.0 Specifications 3.0 Package Contents 4.0 Panel Descriptions 5.0 Connection Diagram...
  • Page 3 1.0 Introduction The Digital to Analog Audio Decoder features an integrated 24 bit audio DSP. This unit can decode a variety of digital audio formats, including Dobly Digital (AC3), DTS and PCM. It can simply connect an Optical (Toslink) or Digital Coaxial Cable to the input, then the decoded audio can be transmitted as 2 channel analog audio via the Stereo RCA output or the 3.5mm output (suitable for headphones) simultaneously.
  • Page 4 frequency audio decode. 3.Support Dolby Digital 5.1 samples ,DTS-ES6.1 samples audio decode. 4.No need to install drivers. Portable, flexible, plug and play. 2.0 SPECIFICATIONS Input Ports: 1 x Optical (Toslink), 1 x Digital Coaxial. Output Ports: 1 x RCA (L/R), 1 x 3.5mm (Headphone). Signal to Noise Ratio: 120db.
  • Page 5 3.0 PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: 1) Audio Decoder ---------------1PCS 2) 5V/1A DC Adaptor----------------------1PCS 3) User Manual. -------------------1PCS 4.0 PANEL DESCRIPTIONS Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements.
  • Page 6 Back Panel: Top Panel: Front Panel 5.0 CONNECTION DIAGRAM 1. Connect a source such as a Blu-Ray Player, game console, A/V Receiver, etc. to the audio Decoder SPDIF...
  • Page 7 input by fiber cable or Coaxial input by coaxial calbe. 2. Connect a headphone or analog audio amplifier to the audio output on the Decoder. 3.Power on the Decoder and select the switch to your need audio input port.

Table of Contents