Table of Contents
Advertisement
4
Installation
For safety, ensure the mounting surface supports more than the weight of the speaker. Use
only industry-accepted fasteners and mounting methods when mounting the loudspeaker.
Consult an expert if you are unsure.
Caution!
It is the installer's responsibility to determine and use the proper mounting hardware for
!
the wall construction type.
Disregarding this caution could result in damage to the product and personal injuries may
occur.
Safety point
As an added safety measure, it is suggested the user install an extra suspension point back to
the building structural supports. This safety point should have as little slack as possible (less
than 1-inch is preferable).
4.1
Suspending the subwoofer
To suspend the subwoofer, do the following:
1.
2.
3.
4.
Electro-Voice
Turn the subwoofer upside down.
Remove the two subwoofer feet with the supplied Allen wrench.
Attach the mounting point covers on the U-bracket mounting points.
Rotate the logo by replacing it, as shown in the Replacing the logo section.
Installation manual
en
9
2017.08 | 01 | F.01U.345.359
Hide quick links:
Advertisement
Table of Contents
