Pressure Sensor Inputs (Left To Right); Bms Output (Con5); Outputs (Left To Right) - 3P Technik TC320 Installation And Operating Manual

Each switched input is also designed to operate correctly with 3P Technik conductivity probes

Pressure Sensor Inputs (left to right)

Con3 (left) – Tank 1 Level Sensor
Con4 (right) – Tank 2 Level Sensor

BMS Output (con5)

Type – Non contact relay
Terminals – Common, Normally Open, Normally Closed
Power Rating max 10A 230Vac

Outputs (left to right)

1 – Top-up solenoid(s)
2 – (reserved for future upgrade)
3 – Pump1
4 – Pump2
Outputs supply mains voltage AC electricity at 230v nominal to connected equipment. Live is switched,
Earth and Neutral are permanently connected.
TC Series Controller v1.30
www.3ptechik.co.uk 09-August-2017 Page 26 of 28