TATA Motors NEXON Owner's Manual page 144

EMERGENCY AND BREAKDOWN ASSISTANCE
4.
To free the headlamp bulb from the
socket, press and swing the retaining
spring and pull it straight back.
134
5.
Pull out the bulb from the socket.
6.
Insert the new bulb (without touching
the glass) into the socket.
7. Move the retaining spring up and
push it slightly until it locks properly.
8.
Refit the connector into the bulb and
press the dust cover on headlamp
housing to fit it properly.
WARNING
 It is dangerous if a halogen bulb
breaks. These bulbs contain
pressurized gas and if broken,
will explode causing serious in-
jury by the flying glass.
 Halogen bulbs can break if the
glass portion is touched with
bare hands, body oil could
cause the bulb to heat unevenly
and explode when lit.
 Never touch the glass portion of
the bulb with your bare hands
and always wear eye protection
when handling or
around halogen bulbs. Always
keep halogen bulbs out of the
reach of children.
Nexon/Rev01,Sept 17
working