Uniden UNVR85x4 User Manual page 47

Add Alarm Linkage
Complete the following to setup:
1) Rule Name: Select a name for the alarm linkage rule.
2) Alarm Type: Linkage currently supports eight alarm types,
including: alarm input, motion detection, video tampering
alarm, video loss, target count detection, area detection,
object detection and line crossing detection. The last four
require specialized detection to be enabled.
3) Alarm Source: Choose the source to be monitored for the
alarm from all the channels available on devices currently
added to the VMS.
4) Linkage Action: Check all the boxes that apply to actions you
would like the alarm to trigger.
• Map: Displays the alarm notification in the map
interface. For the linkage to work, the channel needs
to be linked to the map. Once triggered, the channel's
icon on the map will turn red.
• Capture: Capture a screenshot of the linked channel
when triggered.
• PTZ: Once triggered, the PTZ control will enter into a
certain preset, cruise or track. (Can only be activated for
PTZ supported devices.)
47