Pioneer Elite VSX-24TX Operating Instructions Manual page 30

Surround Sound Set Up
Î
S0URCE RECEIVER
MULTI SYSTEM
OPERATION OFF
DVD/LD TV/SAT VCR1 VCR2
MULTI CONTROL
MD/
CD TUNER TVCONT
TAPE1
CLASS MPX BAND DIRECT ACCESS
7 3 8
¶
- + - +
TUNING STATION
1 ¡ 4 ¢
-
+
DTV ON/OFF DTV MENU CHANNEL
2 3
1
5 6
4
8 9
7
GUIDE
EXIT
0 ENTER
DISC
+10
TV
TV VOL TV CONTROL VOLUME
TV FUNC
EFFECT
MENU MUTE
/CH SEL
FUNCTION
ENTER
SIGNAL
SELECT
/dts
SYSTEM
THX ADVANCED
STANDARD
SETUP
REMOTE
MIDNIGHT DSP STEREO
SETUP
DIGITAL NR
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
It is possible to set channels levels
memo
independently for
STEREO, EXTERNAL DECODER and
each DSP mode for listening-once
purposes (see p.22 6) but if you do
so these levels will remain in
Surround/dts setup mode unless put
back to zero. They will show up the
display in step 3.
30
3
After selecting SETTING START with the ∞ button
press ENTER. The TEST TONE will be output.
These settings will be displayed on your TV.
It takes a moment for the machine to set itself. MASTER
VOLUME rotates to the reference position (0dB), and the test
tone is output.
To exit before outputting the TEST TONE
Press ENTER
To exit while outputting the TEST TONE
Press ENTER.
3,4
4
Adjust speaker levels so that you hear the test tone
at the same volume from each speaker when seated
in your main listening position.
NOTE : The volume of the sub-woofer tends to sound lower than
it actually is, you may need to raise its level after testing the
sound with actual soundtracks.
In AUTO mode
1 Press 2 or 3 to adjust the level of the speaker outputting
In MANU mode
1 Press 2 or 3 to adjust the level of the first speaker.
2 Press 5r∞ to switch the TEST TONE to the next speaker.
3 Repeat 1 and 2 for each speaker.
If you are using a Sound Pressure Level (SPL) meter
Take the readings from your main listening position and adjust
the level of each speaker to 75 dB SPL (C-weighted/slow model).
5
Surround/dts,
When you have adjusted each speaker level, press
ENTER to return to the previous screen
The MASTER VOLUME will return to its original position.
Next, proceed to CROSSOVER NETWORK below.
If you want to change a setting before proceeding.
Simply use the arrow buttons to go back.
6
Select EXIT with the 5r∞ buttons and press ENTER
to return to the SYSTEM SETUP MENU
Channel Level
Test Tone [ AUTO ]
[Setting OK ]
Front L [ 0dB]
L
Center [ 0dB]
[ 0dB]
Front
R
[ 0dB]
Surround
R
[ 0dB]
Surround L
[ 0dB]
Subwoofer
SIGNAL STEREO
SELECT
ANALOG SP A
AUTO
the TEST TONE.
VOLUME
dB