Connections - Pioneer PD-F1039 Operating Instructions Manual

CONNECTIONS

Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.
Normal conections
Stereo amplifier
C D
DIGITAL
R L
OPTICAL IN
Red White
R L
Audio cable
A-1
Red
R L
R L
LINE OUT
PD-F1039
A Making connections
1
Connect the LINE OUT jacks of this unit to the input jacks (CD
or AUX) of the amplifier. Make sure that the white plugs are
connected to the left (L) jacks and the red plugs to the right (R)
jacks.
• Be sure not to connect this unit to the amplifier's PHONO
jacks, as sound will be distorted and normal playback will not
be possible.
2
Connect the power cord to a household AC wall outlet.
• Make sure plugs are inserted fully into the wall outlet.
Note!!
If you connect the power cord to a "SWITCHED" AC outlet on an
amplifier, you will not be able to use this unit's memory function.
B Connecting the OPTICAL FIBER CABLE
CD can be played using the digital output.
This unit can be connected to an amplifier equipped with an optical
digital jack.
1. Remove the protective dust cap from this unit's OPTICAL
DIGITAL OUT jack.
2. Use an optical fiber cable to connect the OPTICAL DIGITAL
OUT jack of this unit to the optical input jack of the amplifier.
• Align the plug of the optical fiber cable with the optical digital
jack and fully insert the plug to make a secure connection.
Use a separately sold optical fiber cable for the optical digital jack
connections.
C System remote control with a Pioneer stereo
amplifier that has the Î mark
When a Pioneer stereo amplifier bearing the Î mark is used,
connect the CONTROL IN jack on the rear panel of the CD player
to the CONTROL OUT jack of the amplifier. This will enable the
CD player to be controlled using the remote control unit supplied
with the stereo amplifier. If you do not plan to use this feature, it is
not necessary to connect the CONTROL IN/OUT jacks.
6
Cassette deck
CONTROL CD•DECK
SYNCHRO
OUT
C
Control cable
B
D
Optical
CD•DECK
fiber
SYNCHRO
cable
White
cable
SLAVE MASTER
R L
IN OUT
CD•DECK
OPTICAL
SLAVE SYNCHRO
DIGITAL OUT
LINE IN MASTER SLAVE
CONTROL
SLAVE MASTER
R L R L IN OUT
CD•DECK IN OUT
OPTICAL
LINE OUT SLAVE SYNCHRO
CONTROL
DIGITAL OUT
LINE IN MASTER SLAVE
CONTROL
To the CONTROL IN
jack of the Pioneer
component bearing
the Î mark.
C
Stereo
amplifier
IN OUT
CONTROL
A-2
Power cord
• The remote control unit supplied with the amplifier can be used
to control Play, Stop, Pause, Track/Disc Search and Disc
Change operations.
• For instructions regarding connections and operation, refer to
the operating instructions provided with your stereo amplifier.
Notes!!
• When a control cable is connected to the player's CONTROL IN
jack, direct control of the player with the remote control unit is
not possible. Operate the player with the remote control unit by
aiming it at the amplifier.
• Be sure to connect both of the control cable's plugs securely to
the CONTROL IN and CONTROL OUT jacks. Do not connect
only one end of the cable.
• Be sure to turn off the power of the amplifier before connect-
ing the power cord and output cable.
• When only the digital output is connected, the remote sensor
of the amplifier does not function. To operate it, connect the
output cable to the stereo amplifier as well as connecting the
digital output.
D CD•Deck synchro function
If you have a Pioneer cassette deck provided with the CD•Deck
synchro function, connect the CD•DECK SYNCHRO jacks of the
CD player and cassette deck. With this function, synchro
recording can be carried out between the player and deck.
• For details on connections and operation, refer to the operating
instructions supplied with the cassette deck.
• The CD•DECK SYNCHRO cable is not supplied with the CD
player.
• When CD•Deck synchro recording is carried out on several
discs, use the program playback function. (Refer to page 16 for
details of program playback.)
Note!!
In order to enable the CD•DECK SYNCHRO recording function, the
output cable must be connected to the stereo amplifier.
When connecting another PD-F1039 to
create a 602-disc changer, make the
normal connections, then also make
the connections shown below.
SLAVE unit
R L R L SLAVE MASTER
IN OUT
OPTICAL CD•DECK
LINE OUT SLAVE SYNCHRO
DIGITAL OUT
LINE IN MASTER SLAVE
CONTROL
SLAVE MASTER
R
L IN OUT
LINE OUT
MASTER SLAVE
CONTROL
Red White
R L
Control cable
E-1
R L R L
R R
L L
CD•DECK
OPTICAL
LINE OUT SLAVE SYNCHRO
DIGITAL OUT
LINE IN
SLAVE
R L R L
CD•DECK IN
OPTICAL
LINE OUT SLAVE SYNCHRO
DIGITAL OUT
LINE IN MASTER SLAVE
MASTER unit
IN OUT
CONTROL
E-2
SLAVE MASTER
IN OUT
IN OUT
CONTROL
MASTER SLAVE
CONTROL
MASTER IN OUT
OUT
CONTROL
CONTROL