To The Reader; Selection Guide - Waveshare AlphaBot 2 User Manual

AlphaBot 2 User Manual

To the Reader

Selection Guide

Note: Accessories may be different in different product package. This manual describes all the
compatible accessories but perhaps the product you bought doesn't contain some of them. The
figure below shows most the compatible accessories:
Package Contents
Item Description
Motor driver, integrates sensors for
AlphaBot2-Base
obstacle avoiding, line tracking
Adapter
AlphaBot2-Ar
Arduino
AlphaBot2-Pi Adapter board, for connecting RPi3 B
Adapter board, for connecting RPi
AlphaBot2-PiZero
Zero W
RPi3 B Raspberry Pi 3 Model B
UNO PLUS Enhanced Arduino compatible board
Dual-mode Bluetooth Dual-mode Bluetooth module
Ultrasonic sensor Ultrasonic obstacle avoiding, ranging
IR remote controller remotely control the robot
RPi Camera (B) Raspberry Pi camera, adjustable focus
Servo, working with the pan head,
SG90
controlling the rotation of the camera
Micro SD Card 16GB 16GB Miro SD Card, class 10
5V 2.5A Power RPi3 B requires 2.5A or above power
Adapter supply
Note:
AlphaBot2-Ar Acc Pack requires an Arduino compatible controller, if you don't have one in hand,
please consider the all-in-one kits: AlphaBot2-Ar.
AlphaBot2-Pi Acc Pack requires the controller Raspberry Pi, if you don't have one in hand, please
consider the all-in-one kit: AlphaBot2-Pi.
AlphaBot2-PiZero Acc Pack requires the controller Raspberry Pi Zero/Zero W, which should be
purchased separately.
Due to the structure design, ultrasonic sensor module can NOT be used with the AlphaBot2-Pi kit.
Products
AlphaBot2-
Ar
Pack
√
board, for connecting
√
√
√
2
share awesome hardware
AlphaBot2 AlphaBot2-
Acc
-Ar Pi Acc Pack
√ √
√
√
√
√
√
√ √
√
√
√
√
AlphaBot2-
AlphaBot2
PiZero Acc
-Pi
Pack
√ √
√
√
√
√
√ √
√ √
√ √
√ √
√ √