Cisco UCS User Manual page 39

Chapter 6 Installing Operating Systems
•
•
•
•
Package Selection
To configure the package selection settings, follow these steps:
Step 1
Click Package Selection to open the corresponding window.
Step 2
Select all check boxes that apply.
Network Settings
To configure the network settings, follow these steps:
Step 1
Click Network Settings to open the corresponding window.
The Network Settings window displays the link status of available network interfaces and the
corresponding IP address, subnet mask, gateway, DNS, link status, vendor, type, and MAC address.
Step 2
To edit the Network Settings, do the following:
a.
b.
•
•
In the Confirm Root Password, reenter the root password.
From the Default Language drop-down list, choose a default language.
From the Keyboard drop-down list, choose the type of keyboard layout.
From the Time Zone drop-down list, choose the time zone.
Select a network interface and click Edit.
The Network Settings dialog box displays.
In the Network Settings dialog box, do the following:
Select IP Address from DHCP server or Static IP Address. If you select Static IP Address, do the
following:
–
In the IP Address field, enter the IPv4 address
–
In the Subnet Mask field, enter the subnet IPv4 address.
–
In the Gateway field, enter the gateway IPv4 address.
–
In the DNS field, enter the DNS IPv4 address.
Click OK.
Cisco UCS Server Configuration Utility, Release 5.0
Other OS Install
6-15