Pioneer VSX-D812 Operating Instructions Manual page 33

Controls and displays
FL DIMMER
Dims or brightens the display.
4 MASTER VOLUME +/–
Use to set the listening volume.
5 Receiver and component control
buttons (Press the corresponding MULTI
CONTROL button first to access).
These controls function according to the
component you've selected.
TOP MENU
Displays the disc 'top' menu of a DVD.
AUDIO
Changes the audio language or channel
with DVD discs.
MCACC SETUP
Use to setup your speaker system using
the multi-channel acoustic calibration
system.
MENU
Displays the disc menu of DVD-Video
discs. It also displays TV and DTV menus.
INPUT ATT
Attenuates (lowers) the level of an analog
input signal to prevent distortion.
T.EDIT
Use to memorize and name a station for
recall using the STATION +/– buttons
(page 53).
GUIDE
Displays the guides on a digital TV.
SUBTITLE
Displays/changes the subtitles included
in multilingual DVD-Video discs.
SLEEP
Use to put the receiver in sleep mode and
select the amount of time before the
receiver turns off.
6 (TUNE +/–, ST +/–) /ENTER
Use the arrow buttons when setting up
your surround sound system (see
page 43). Also used to control DVD
menus/options and for deck 1 of a double
cassette deck player. Use the TUNE +/–
buttons to find radio frequencies and use
ST +/– to find preset stations (page 55).
7 Component/Tuner control buttons
The main buttons ( ,
control a component after you have selected
it using the MULTI CONTROL buttons. The
tuner/DTV controls above these buttons can
be accessed after you have selected the
corresponding MULTI CONTROL button
(TUNER or TV/SAT (when connected to
DTV)).
RETURN
Returns to the last screen selected when
using a digital TV tuner.
BAND
Switches between the tuner AM and FM
bands (page 52).
RF ATT
Use to lower the input level of a radio
signal that is too powerful or contains
interference that causes the sound to
distort (page 52).
DISPLAY
Use to switch the display between the
station preset name, frequency and RDS
data when using the tuner.
CLASS
Switches between the three banks
(classes) of radio station presets
(page 53).
MPX
Switches between stereo and mono
reception of FM broadcasts. If the signal
is weak then switching to mono will
improve the sound quality (page 52).
, etc.) are used to
05
33
En