07
Setting up
Surround back speaker distance
setting (page 47)
Specifies the distance from your listening
position to your surround back speakers.
Surround left speaker distance setting
(page 47)
Specify the distance from your listening
position to your surround left speaker.
Subwoofer distance setting (page 47)
Specify the distance from your listening
position to your subwoofer.
Dynamic range control setting
(page 48)
Compress the dynamic range of the
sound track.
Dual mono setting (page 48)
Isolate one channel when listening to
discs with dual mono encoding.
Surround back channel input setting
(VSX-D812/D912 only) (page 48)
Specify the number of surround back
analog inputs you have connected.
Digital input settings (page 48)
Specify the components to be assigned to
the digital inputs (below).
•
Coaxial digital input 1 setting
•
Coaxial digital input 2 setting
•
Optical digital input 1 setting
•
Optical digital input 2 setting (VSX-
D812/D912 only)
4
Use
or
The setting is entered automatically.
44
En
to adjust the setting.
5
Repeat steps 3 and 4 to adjust other
setup options.
6
When you're done, press ENTER to
exit.
• The setting display is automatically exited
after 3 minutes of inactivity.
Speaker setting
• Default setting: FL-CS-SS (If a subwoofer
is detected when you turn the receiver on,
the default is FS-CS-SS.)
You must let the receiver know how many
speakers you have, and how big they are. The
size you choose (large or small) determines
how much bass is sent from the receiver to
the speakers.
In the display, F, C, and S refer to front, center,
and surround speakers respectively. Speaker
size is denoted as L for large speakers, S for
small speakers, and
is connected.
• If the cone size (diameter) of the speaker
is larger than 15 cm, set the speaker size
to L.
• If you're not using a subwoofer, we
recommend setting the front speakers to
L.
•
Cycle through the available choices
using
or
and choose a configuration
that matches your speaker setup.
(asterisk) if no speaker