JVC NX-F30B Service Manual page 8

3.1.5 Removing the Main board (See Fig.12, 13)
(1) Disconnect the connector wire from FAN connected to con-
nector CN461 of the Main board. (See Fig.12)
(2) Disconnect the connector wire from Power supply unit con-
nected to connector CN981
(3) Disconnect the card wires from DVD module board con-
nected to connectors, CN481,
Main board. (See Fig.12)
(4) Disconnect the card wire from Tuner pack connected to
connector CN421 of the Main board. (see Fig.12)
(5) Disconnect the card wire from Loader board connected to
connector CN451 of the Main board. (See Fig.12)
CN421 CN461
CN451 CN701
(6) Remove the four screws J attaching the Main board. (see
Fig.13)
J
1-8 (No.MB695<Rev.001>)
of the Main board. (See Fig.12)
CN661 and CN701
CN661
CN981 CN481
Fig.12
Fig.13
3.1.6 Removing the Rear panel (See Fig.14)
(1) Remove the four screws K and one screw L attaching the
Rear panel.
of the
3.1.7 Removing the DVD mechanism (See Fig.15)
(1) Remove the three screws M attaching the DVD module
board.
(2) Remove the one screw N attaching the DVD mechanism.
N
3.1.8 Removing the Power supply unit (see Fig.16)
(1) Remove the five screws P attaching the Power supply unit.
K
Fig.14
M
Fig.15
P
P
Fig.16
L K