Controls and displays
After pressing, you can access a radio
station directly using the number buttons
Use the number buttons to directly select a
radio frequency (page 54) or the tracks on a
CD, DVD, etc.
Use to select channels when using a VCR,
DVR, etc. Also use to skip tracks backward or
forward on CDs, DVDs, etc.
10 INPUT SELECT
Use to select the input source.
This lights when a command is sent from the
Press to turn on/off other components
connected to the receiver.
13 DISC (ENTER)
The button's use depends on the component
selected. It can be used to enter commands
for TV or DTV, and can also be used to select
a disc in a multi-CD player.
14 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the TV CONT button. Thus if you
only have one TV to hook up to this system
assign it to the TV CONT MULTI CONTROL
button. If you have two TVs, assign the main
TV to the TV CONT button.
Use to turn on/off the power of the TV.
(TV CONTROL) INPUT SELECT
Use select the TV function.
Use to select channels.
Use to adjust the volume on your TV.