Using other functions
Watching video and audio sources
independently
You can listen to a sound source and select a different
video source on your TV.
•
While listening to a source, press RECEIVER, then
VIDEO SEL to select the video source you want to
watch.
VIDEO SEL
Press repeatedly to cycle through the possible video
sources. You can select DVD/LD, TV/SAT, VIDEO,
VCR1/DVR, VCR2 or OFF (no video signal).
• Selecting any input besides those listed above is the
same as selecting OFF.
Note
• If you change the source using the MULTI CONTROL
buttons (or the MULTI JOG dial on the front panel), or
switch the power off, the system returns to normal
playback.
RECEIVER
Enhancing SACD playback
• Default setting: 0dB
You can get more detail from SACDs by maximizing the
dynamic range (during digital processing) using the
SACD gain feature.
1
Press RECEIVER.
2
Press EFFECT/CH SEL repeatedly until SACD GAIN
shows in the display.
3
Use the +/– buttons to switch the SACD gain
between 0dB and 6dB.
For most SACD sources, selecting 6dB will result in high
sound quality and greater detail. The level will be
adjusted automatically for playback at the same volume.
Note
• You shouldn't have any problems using this feature
with most SACD discs, but if the sound distorts, it is
best to switch the gain setting back to 0dB.
Dimming the display
You can choose between four brightness for the front
panel display. Note that when selecting sources, the
display automatically brightens for a few seconds.
DIMMER
1
Press RECEIVER.
RECEIVER
EFFECT/CH SEL
+
RECEIVER
09
67
En