Watching Video And Audio Sources Independently; Dimming The Display - Pioneer VSX-9300TX Operating Instructions Manual

Using other functions
Watching video and audio sources
independently
You can listen to a sound source and select a different
video source on your TV.
• While listening to a source, press RECEIVER, then
VIDEO SEL to select the video source you want to
watch.
VIDEO SEL
Press repeatedly to cycle through the possible video
sources. You can select DVD/LD, TV/SAT, VIDEO,
VCR1/DVR, VCR2 or OFF (no video signal).
• Selecting any input besides those listed above is the
same as selecting OFF.
Note
• If you change the source using the MULTI CONTROL
buttons (or the MULTI JOG dial on the front panel), or
switch the power off, the system returns to normal
playback.
RECEIVER

Dimming the display

You can choose between four brightness for the front
panel display. Note that when selecting sources, the
display automatically brightens for a few seconds.
DIMMER
1 Press RECEIVER.
2 Press DIMMER repeatedly to change the
brightness of the front panel display.
Tip
• Switching the dimmer to lowest setting will also
switch off the MCACC indicator.
RECEIVER
09
63
En