Clearing All Stations From The Rds And Eon Searches - Pioneer VSX-AX5Ai-G Operating Instructions Manual

Using the tuner
Clearing all stations from the RDS and EON
searches
The receiver will automatically register an identifying
marker (called a PI code) for any station you input into
the memory classes which can receive RDS or EON data.
If you want to remove the currently memorized stations
from RDS and EON searches, you can do it by erasing the
PI codes.
1 Press and hold EON MODE for about two
seconds.
ERASE PI is displayed.
2 Press ENTER.
ERASE PI flashes for two seconds to indicate the PI codes
have been erased.
06
53
En