Display - Pioneer VSX-AX10Ai-G Operating Instructions Manual

03 Controls and displays

Display

1
SIGNAL
AUTO
L
RF
OVER ATT
DIGITAL
ANALOG
TUNED STEREO MONO
E O N
RDS
9
1 SIGNAL indicators (page 74)
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically.
2 Program format indicators
These change according to which channels are active in
Dolby, DTS, DVD-A and SACD sources.
LS, S and RS will light at the same time to indicate
6.1channel sources.
• L – Left front channel
• C – Center channel
• R – Right front channel
• LS – Left surround channel
• S – Surround channel (mono)
• RS – Right surround channel
• LFE – Low frequency effects channel
3 ((( )))
Lights when an LFE signal is being input.
4 Analog level indicators
OVER indicator
Lights when an analog input signal is too high,
risking distortion. Use the input attenuator to reduce
the level.
ATT indicator (page 75)
Lights when the input attenuator is on.
5 Character display
6 Digital format indicators
•
DIGITAL
detected.
• – Lights when a DTS signal is detected.
• – Lights when one of the Home THX modes is
selected.
• – Lights during Surround EX matrix processing.
• – Lights when a decoding DTS-ES audio.
• – Lights during DTS-ES discrete processing.
DISC
30
En
2 3 4
L C R
S R
S S
LFE
SP AB
TAPE 2
RF ATT
8 7
– Lights when a Dolby Digital signal is
5
• – Lights during DTS-ES matrix processing.
MTRX
• – Lights during Dolby Pro Logic II and
PRO LOGIC
Pro Logic IIx processing.
• – Lights during Neo:6 processing with 2-
Neo :6
channel sources.
• – Lights during two-channel
2ch
PLAYBACK
playback.
7 Speaker indicators
Light to indicate the current speaker system, A and/or B.
8 TAPE 2 (page 74)
Lights when the TAPE 2 monitor is switched on.
9 Tuner indicators
STEREO (page 54)
Lights when listening to a stereo FM broadcast in
auto/stereo mode.
TUNED
Lights when tuned to a broadcast.
MONO (page 54)
Lights when the tuner MPX mode is set to mono.
6
DIGITAL
DISC MTRX
PRO LOGIC
Neo :6
2ch
PLAYBACK