Using The Tuner; Changing The Frequency Step; Finding A Station - Pioneer VSX-AX10Ai-G Operating Instructions Manual

Using the tuner

Chapter 6
Using the tuner
Note
• The remote control operations in this section are
accessed from the remote control tuner menus. If
you're not sure how to navigate the touch panel, see
Basic remote control displays on page 31. To go to the
tuner menu, press TUNER on the remote control
Home menu ( ):
HOME
RECEIVER
INPUT 1
DVD
/ LD
DVR
/ VCR1
TV
CONT OPERATION
TUNER 1/2
TV
CONT
– +
STATION
+
–
TUNING
BAND CLASS MPX
DISP MODE TUNER EDIT

Changing the frequency step

• Default setting: 9k/0.05MHz
If you find that you can't tune into stations successfully,
the frequency step may not be suitable for your country/
region.
1 Switch the receiver into standby.
2 While holding down the LISTENING MODE
SELECTOR dial on the front panel, press
ON to change the frequency step.
The new frequency step (9k/0.05MHz or 10k/0.10MHz) is
shown in the display.
1/3
RECEIVER
2 3
TV
SAT
/ DVD
CD TUNER
MULTI SYSTEM
OFF
SETUP
TUNER 2/2
TV
CONT
1 2 3
4 5 6
7 8 9 0
DIRECT
ACCESS
STANDBY/

Finding a station

The following steps show you how to tune in to FM and
AM radio broadcasts using the automatic (search) and
manual (step) tuning functions. If you already know the
exact frequency of the station you want to listen to, see
Tuning directly to a station below. Once you are tuned to
a station you can memorize the frequency for recall
later—see Memorizing station presets on page 54 for
more on how to do this.
TUNER
–
STATION
–
TUNING
BAND CLASS
DISP MODE TUNER EDIT
1 Press BAND to change the band (FM or AM), if
necessary.
Each press switches the band between FM and AM.
2 Tune to a station using the TUNING +/– buttons.
Automatic tuning
To search for stations in the currently selected band,
press and hold either of the TUNING +/– buttons for
about a second. The receiver will start searching for
the next station, stopping when it has found one.
Repeat this step to search for other stations.
Manual tuning
To change the frequency one step at a time, press the
TUNING +/– buttons repeatedly.
High speed tuning
Press and hold the TUNING +/– buttons for high
speed tuning, releasing the button once you reach
the frequency you want.
1/2
TV
CONT
+
+
MPX
06
53
En