Zxv10 W300 Factory Defaults; Computer Setup - Zte ZXV10 W300 User Manual

3.2 ZXV10 W300 Factory Defaults

Factory defaults are as follows:
In the case that the device doesn't work due to configuration
errors or the password is forgot, insert a needle into the
Reset hole on the back of the device and push the button for
more than 10 seconds to reset all the device configurations
to the factory defaults.

3.3 Computer Setup

If your computer uses Windows 95/98/ME/2000/XP, set up
your computer using the following two methods of which
the first one is recommended. The following examples use
Windows XP as the operating system. The setup of
computers using other operating systems is similar.
1.
DHCP.
1)
ZXV10 W300 Wireless ADSL Router User's Manual
Device IP address: 192.168.1.1; Subnet mask:
255.255.255.0
Use DHCP server by default. The IP address can be
obtained from the device via DHCP.
Line coding
(T1.413/G.DMT/G.LITE/ADSL2/ADSL2+
auto-sensing)
Note:
The PC can obtain an address from the device via
From the Windows taskbar, select Start > Control
AUTO