Connecting An Ir Receiver - Pioneer VSX-72TXV-S Operating Instructions Manual

Other connections
• You can't use the iPod and XM Radio functions
simultaneously using the multi-room feature.
4 Use the MASTER VOLUME dial to adjust the
volume.
This is only possible if you selected the VARIABLE
volume control in Multi-Room and IR receiver setup on
1
page 63.
5 When you're finished, press CONTROL again to
return to the main room controls.
You can also press the MULTI ROOM & SOURCE ON/
OFF button on the front panel to switch off all output to
2
the sub room(s).
Multi-room remote controls
The following table shows the possible multi-room
remote controls:
Button What it does
SHIFT+
Selects the sub room you want to control,
shown in the display as RCV/RM2 (ZONE/
RECEIVER
ROOM2) or RCV/RM3 (ZONE/ROOM3).
Switches on/off power in the currently selected
sub room.
INPUT
Use to select the input source in the currently
selected sub room.
SELECT
Input Use to select the input source directly (this may
not work for some functions) in the currently
source
selected sub room.
buttons
VOL +/– Use to set the listening volume in the currently
selected sub room (ZONE/ROOM2 only).

Connecting an IR receiver

If you keep your stereo components in a closed cabinet or
shelving unit, you can use an optional IR receiver (such
as a Niles or Xantech unit) to control your system instead
of the remote sensor on the front panel of this receiver.
You may need to specify your IR receiver type in Multi-
Room and IR receiver setup on page 63.
Note
1 The volume levels of the main and sub rooms are independent.
2 • You won't be able to switch the main room off completely unless you've switched off the multi-room control first.
• If you don't plan to use the multi-room feature for awhile, turn off the power in both the sub and main rooms so that this receiver is in standby.
3 • Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR receiver remote sensor window.
• Note that other manufacturers may not use the IR terminology. Refer to the manual that came with your component to check for IR compatibility.
• If using two remote controls (at the same time), the IR receiver's remote sensor takes priority over the remote sensor on the front panel.
1 Connect the IR receiver sensor to the MULTI-ROOM
& SOURCE IR IN jack on the rear of this receiver.
MULTI-ROOM & SOURCE
ROOM2(ZONE2)
IN OUT
IR
12 V TRIGGER
IR receiver
2 Connect the IR IN jack of another component to the
MULTI-ROOM & SOURCE IR OUT jack on the rear of this
receiver to link it to the IR receiver.
Please see the manual supplied with your IR receiver for
the type of cable necessary for the connection.
• If you want to link a Pioneer component to the IR
receiver, see Operating other Pioneer components
with this unit's sensor on page 73 to connect to the
CONTROL jacks instead of the IR OUT jack.
3
Closet or shelving unit
Non-Pioneer
component
IR
IN
Pioneer
CONTROL component
IN OUT
MULTI-ROOM
AUDIO PRE O
&SOURCE ANTENNA
R
/REC SEL PHONO
OUT1 FM UNBAL 75Ω AM LOOP
ROOM3(ZONE3)
IN
MULTI-ROOM & SOURCE
MONITOR MULTI-ROOM & SOURCE
OUT2 IN ROOM2(ZONE2) OUT OUT R ROOM2(ZONE2) L SUB W.
CD
S400 OUT IN
IR
USB
AUDIO 12 V TRIGGER
IN
DVD/
1 2
LD
IN1
IN
IN1 (DC OUT 12V TOTAL 50mA MAX)
(SAT)
ROOM2 MULTI-ROOM OUT
S400
& SOURCE
TV
MONITOR IN2 IN
IN2 OUT
(ZONE2)
(DVR/ CD-R/
OUT TAPE R
HDMI IN1
VCR 1) IN1(DVD/LD)
SAT
IN1 Y Y
IN2(TV) IN
IN
IN3 1–2 R L
(DVR/
VCR 2) ASSIGNABLE FR FL iPod
VIDEO1/
IN4 P P
B B GAME1
(CD-R) IN
1–4 IN2 SUB W. CENTER
ASSIGNA-
BLE P P OUT
R R
1–2
IN1
DVR/ SUR-
(DVD/ ROUND
VCR 1
IN2 IN3 IN3
LD)
Y Y IN
OUT
IN2
(CD) R L
P P OUT
B B
IN DVR/
R SURROUND L RS-
VCR 2
BACK
P P IN
R R MULTI CH
XM
IN
OUT IN
R L
1–3 S - VIDEO VIDEO
ASSIGNABLE
CONTROL
DIGITAL COMPONENT VIDEO VIDEO AUDIO
R L
SURROUND
BACK
MULTI CH
IN
OUT
CONTROL
08
57
En