Using A Usb Cable To Connect To A Pc; Connecting To A Wireless Lan; Connecting An Ir Receiver - Pioneer sc-lx86 Operating Instructions Manual

Hide thumbs Also See for sc-lx86:
Table of Contents

Advertisement

03

Using a USB cable to connect to a PC

SC-LX86 only
By using a USB cable (sold separately) to connect this unit's USB-DAC IN terminal to the USB port on a PC, this
unit can be used as a D/A converter.
For details regarding the output of signals input to the USB-DAC IN terminal, see
page
54.
Important
! The exclusive driver must be installed on the computer in order to play high sound quality files of over 48
kHz/24 bits.
The driver software is provided on the included CD-ROM (AVNavigator).
USB-DAC
IN
Note
! This unit cannot be used to play audio files from a PC unless Media Player is installed on the connected PC.
Playing music from a PC
PC
USB-DAC
USB
IN
A-Type
B-Type

Connecting to a wireless LAN

Wireless connection to the network is possible through a wireless LAN connection. Use the separately sold
AS-WL300 for connection.
! Use only the furnished accessory connecting cable.
! Certain settings are required to use a wireless LAN converter (AS-WL300). For instructions on making these
on
settings, see the operating instructions included with the wireless LAN converter (AS-WL300).
LAN
(10/100) DC OUTPUT
for WIRELESS LAN
( OUTPUT
5 V
0.6 A MAX )
DC 5V
Ethernet
Wireless LAN converter (AS-WL300)

Connecting an IR receiver

If you keep your stereo components in a closed cabinet or shelving unit, or you wish to use the sub zone remote
control in another zone, you can use an optional IR receiver (such as a Niles or Xantech unit) to control your
system instead of the remote sensor on the front panel of this receiver.
! Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR
receiver remote sensor window.
! Note that other manufacturers may not use the IR terminology. Refer to the manual that came with your com-
ponent to check for IR compatibility.
! If using two remote controls (at the same time), the IR receiver's remote sensor takes priority over the remote
sensor on the front panel.
42
Connecting your equipment
LAN
(10/100) DC OUTPUT
for WIRELESS LAN
(OUTPUT
5 V
0.6 A MAX)
Modem
Internet
Router
WAN
WPS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-lx76

Table of Contents