Immobilizerdevice Enabled Indicator Led; Operation - PIAGGIO BEVERLY Cruiser 250ie Owner's Manual

Hide thumbs Also See for BEVERLY Cruiser 250ie:
Table of Contents

Advertisement

01_12

Immobilizerdevice enabled indicator led (01_12)

Activation of the «PIAGGIO IMMOBILIZER» system is signalled by a flashing «O»
warning light.
In order to reduce battery discharge, the indicator LED turns off automatically after 48
hours of uninterrupted functioning.
Should the system fail, different LED flashing patterns will provide the Authorised
Service Centre with information on the type of fault detected.

Operation

Every time the starter key is extracted from either the «OFF» or «LOCK» position, the
protection system activates the engine lock. Turning the key to «ON», with the emer-
gency cut-off switch set to «ON» and the side stand up, disables the engine lock
provided that the safety system recognises the code transmitted by the key. If the code
is not recognised, turn the key first to "OFF" and then to "ON"; if the lock cannot be
disabled, try with the other key supplied (red-coloured). If the engine cannot be started,
contact an Authorised Service Centre, which is provided with the electronic equip-
ment required to detect and repair the system. The immobilizer is also activated when
the emergency cut-off switch stops the engine or the side stand is lowered. This hap-
pens even if the starter key is in «ON». When additional keys are required, please
note that data storage (up to 7 keys max.) must be done on all keys, both new and
existing ones. Take the red-handgrip key and all the black keys supplied to an Au-
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents