Troubleshooting - Panasonic CF-08 Read Me First

Troubleshooting

Follow the instructions below when a problem has occurred. For a software prob-
lem, refer to the software's instruction manual. If the problem persists, contact
Panasonic Technical Support.
No display after
powering on
An afterimage
appears (i.e.,
green, red, and blue
dots remain on the
display) or there are
dots not displaying
the correct colors
E
58
Has the computer or wireless display been set to the
power-saving mode?
To resume operation of your computer from the condition
where the power of the display is off (for energy conser-
vation purposes), touch the screen.
High-precision and advanced technologies are neces-
sary in the production of color liquid crystal displays
(color LCDs). Therefore, if 0.002% or less of the picture
elements either fail to light or remain constantly lit (that
is, more than 99.998% of elements are functioning prop-
erly), no defect is considered to exist.