Security Measures - Panasonic CF-08 Read Me First

Security Measures

You can set the password and/or enable/disable some functions for security pur-
pose.
You can set two types of users with different operating authorities.
Supervisor: Changes settings related to the wireless display operations, and con-
trols the operations of regular users. Set the Supervisor Password in advance
using the [Supervisor] tab in Security Settings (Supervisor) (
User: Executes only operations that have been limited by the Supervisor.
A Double-tap
B Double-tap [Security (Supervisor)].
C Tap the [Supervisor], [User] or [Device Permission] tab.
For information on the tab:
[Supervisor] tab
[User] tab
[Device Permission] tab
<When you tap [Supervisor] or [User] tab>
D Enter your password in [New Password].
When the password has been set, you need to enter your password in
[Current Password].
To disable the password, leave the input field empty.
E Enter your password again in [Confirm Password] and tap
F At the confirmation message, tap [Yes].
When the message that recommends executing Flash Backup appears, tap
.
CAUTION
Do not forget your password. If you forget your Supervisor Password, you will
not be able to use your wireless display. Contact Panasonic Technical Support.
Soon after you create or change the setting, perform Flash Backup (
31). If you do not do so, the setting will not be reflected next time when you turn
on the power for the wireless display.
NOTE NOTE
The password will not be displayed on the screen.
You can use up to 40 alphanumeric characters (excluding spaces).
Disabling the Supervisor Password also disables the User Password.
on the desktop.
page 44
page 44
page 45
below).
.
page
43
E