Acerisdn P10 Utility Installation - Acer ISDN P10 User Manual

2.4 AcerISDN P10 Utility Installation

To install the utility programs, please follow the instructions listed
below.
1. Insert the AcerISDN P10 Utility Installation Diskette or
2. On the task bar, press "Start" and then click "Run". The
F
The next section describes how to use the diagnostic program to
check the card configuration.
CD into drive A: (B:, or D:, etc.).
Program Run dialog box will open.
2-17: I
IGURE NSTALLING THE
Type "D:\UTILITY\SETUP" in the Run Dialog Box.
Press "OK". The InstallShield Wizard will load the
AcerISDN P10 utility installation program.
Press "Next>" to begin installing the AcerISDN P10
Utility. Follow the instructions on the screen to complete
the installation.
Chapter 2 — Installation
U P
TILITY ROGRAMS
21