Changing The Picture Adjustment - Pioneer AVH-P4900D Operation Manual

Operating this unit

Changing the picture adjustment

You can adjust BRIGHT (brightness),
CONTRAST (contrast), COLOR (color) and
HUE (hue) for each source and rear view cam-
era.
! The adjustments of BRIGHT and
CONTRAST are stored separately for light
ambient (daytime) and dark ambient (night-
time). A sun or moon
the left of BRIGHT and CONTRAST, respec-
tively, as the ambient light sensor deter-
mines brightness or darkness.
! You cannot adjust COLOR or HUE for the
audio source.
1 Press V.ADJ and hold to display
PICTURE ADJUST.
Press V.ADJ until PICTURE ADJUST appears
in the display.
2 Touch any of the following touch panel
keys to select the function to be adjusted.
The adjustment function names are displayed
and adjustable ones are highlighted.
! BRIGHT – Adjust the black intensity
! CONTRAST – Adjust the contrast
! COLOR – Adjust the color saturation
! HUE – Adjust the tone of color (red is em-
phasized or green is emphasized)
! DIMMER – Adjust the brightness of display
! BACK-CAMERA – Switch to the picture ad-
justment display for the rear view camera
# You can adjust the picture adjustment for rear
view camera only when B-CAM is turned on.
(Refer to Setting for rear view camera (back up
camera) on page 41.)
# With some rear view cameras, picture adjust-
ment may not be possible.
3 Touch c or d to adjust the selected
item.
Each time you touch c or d it increases or de-
creases the level of selected item. +24 to –24
is displayed as the level is increased or de-
creased.
4
Adjusting the dimmer
The adjustment of DIMMER is stored sepa-
rately for each ambient light; daytime, evening
is displayed to
and nighttime. The brightness of LCD screen
will be adjusted to optimum level automati-
cally in accordance with the ambient light
based on the setting values.
1
PICTURE ADJUST.
Press V.ADJ until PICTURE ADJUST appears
in the display.
2
The ambient light level used as the standard
for adjusting DIMMER appears above the level
bar.
3
Each time you touch c or d moves the key to-
wards the left or the right.
The level indicates the brightness of the
screen being adjusted. The farther the key
moves to the right, the brighter the screen.
4
The icons indicating the current ambient bright-
ness used for adjusting BRIGHT and CONTRAST
may differ from DIMMER slightly.
Touch ESC to hide the touch panel keys.
Press V.ADJ and hold to display
Touch DIMMER.
– Adjust the brightness for
! Red sun
bright ambient light (daytime)
– Adjust the brightness for in-
! White sun
termediate brightness (evening)
– Adjust the brightness for
! Blue moon
dark ambient light (nighttime)
Touch c or d to adjust the brightness.
Touch ESC to hide the touch panel keys.
Note
Section
03
17
En