Seal - Bosch HBN 7005.0 Instruction Manual

Installation

Seal

4.
Unscrew the clips on the left and right and remove
them. (Fig. C) Remove the panel.
5.
The seal at the bottom of the panel can be
removed for cleaning. To do this, unhook the seal
on the left and right.
Clean the glass panels with glass cleaner and a soft
cloth.
Before you insert the panel, replace the seal again at
the bottom of the panel.
Ensure that the label Right above" is upside down at
the bottom left of both panels.
1.
Slide in the glass panel backwards at an angle.
(Fig. D)
2.
Fit the clips and screw them in again. (Fig. E)
3.
Slide in the top panel backwards at an angle.
4.
Replace the cover and screw it back on.
5.
Refit the oven door.
The oven must not be used again until the panels
have been correctly installed.
Clean the seal on the oven with washing up liquid.
Never use caustic or abrasive detergents.
23