Controls And Displays; Display - Pioneer VSA-AX10Ai Operating Instructions Manual

Controls and displays

Chapter 3
Controls and displays

Display

1 2 3 4
SIGNAL L C R
AUTO
L S R
S S
RF
LFE
OVER ATT
DIGITAL
AB
SP
ANALOG
TAPE 2
E O N
RDS RF ATT
8
1 SIGNAL indicators (page 69)
Light to indicate the currently selected input signal.
AUTO lights when the amplifier is set to select the input
signal automatically.
2 Program format indicators
These change according to which channels are active in
Dolby, DTS, DVD-A and SACD sources.
LS, S and RS will light at the same time to indicate
6.1channel sources.
• L – Left front channel
• C – Center channel
• R – Right front channel
• LS – Left surround channel
• S – Surround channel (mono)
• RS – Right surround channel
• LFE – Low frequency effects channel
3 ((( )))
Lights when an LFE signal is being input.
4 Analog level indicators
OVER indicator
Lights when an analog input signal is too high,
risking distortion. Use the input attenuator to reduce
the level.
ATT indicator (page 70)
Lights when the input attenuator is on.
5 Character display
6 Digital format indicators
• – Lights when a Dolby Digital signal is
DIGITAL
detected.
• – Lights when a DTS signal is detected.
7
5
• – Lights when one of the Home THX modes is
selected.
• – Lights during Surround EX matrix processing.
• – Lights when a decoding DTS-ES audio.
• – Lights during DTS-ES discrete processing.
DISC
• – Lights during DTS-ES matrix processing.
MTRX
• – Lights during Dolby Pro Logic II and
PRO LOGIC
Pro Logic IIx processing.
• – Lights during Neo:6 processing with 2-
Neo :6
channel sources.
• – Lights during two-channel
2ch
PLAYBACK
playback.
7 Speaker indicators
Light to indicate the current speaker system, A and/or B.
8 TAPE 2 (page 69)
Lights when the TAPE 2 monitor is switched on.
03
6
DIGITAL
DISC MTRX
PRO LOGIC
Neo :6
2ch
PLAYBACK
27
En