Pioneer VSA-AX10Ai Operating Instructions Manual page 62

07 Controlling other equipment
4 From the 'Replacing Device' screen choose the
type of component that you've connected.
In this example, we're setting the remote to control a
DVD player, so we'll select DVD.
• It is best to have the input source button (DVD/LD)
match the component.
5 From the 'Setting Makers' screen, select the
name of the company that makes your component.
Use the (cursor up/down) buttons to scroll through
the available manufacturers. Here we'll select Pioneer as
an example.
6 Select a setting type.
There may be only one option listed, or there may be
several. Start with the first button available, which will
show the makers name and 1 (in this case Pioneer-1).
62
En
Replacing Device
PRESET RECALL
DVD
TV
DVD recorder
CANCEL
Setting Makers
PRESET RECALL
Pioneer
AKAI
DENON
BACK CANCEL
Setting Type
PRESET RECALL
Pioneer-1
Pioneer-2
BACK CANCEL
7 Point the remote at the component and press
TRY to test if you've set it up properly.
If the component you are trying to control turns on/off,
the setup for this component is complete and you can go
to step 8.
Following Setting?
PRESET RECALL
device : DVD
maker :
Pioneer
Pioneer-1
INSTALL
BACK
If the component doesn't respond, it's possible that:
• Your component manufacturer has several preset
codes for the same component. Press BACK to go
back and select another number (if there is one) from
the list.
• Your component doesn't have a standby mode (and
therefore won't switch on/off).
• There is something blocking the path between the
remote control and the remote sensor of the
component you're trying to control.
• The preset code is unavailable for your component.
Press CANCEL to exit, then try using the method
described in Programming signals from other remote
controls below to program the component into the
remote control. If your component type is different
from the set of controls associated with the input
source (for example you want to control an LD with
the DVD/LD button), it is useful to choose INSTALL
in the next step to change the screen to control the
component you've connected.
8 Press INSTALL to confirm and go back to the
'Select Function' screen to control another
component.
Following Setting?
PRESET RECALL
device : DVD
maker :
Pioneer
type :
Pioneer-1
INSTALL TRY
BACK CANCEL
From the Select Function screen (step 3), you can press
to exit and return to the remote control Home menu
screen.
type :
TRY
CANCEL
PLEASE WAIT