Delphi SKYFi2 Installation Manual page 16

English Skyfi2 install guide:SKYFi2 install guide layout
Aiming the XM Home Antenna
16
For best reception, aim the home
antenna by following these
instructions:
1. Press the "menu" button on the
SKYFi2 Receiver.
2. Use the scroll wheel to select the
"Antenna Aiming" option. Press
the "XM" button to confirm selection.
3. This display will remain on until
you press the "menu" button
again, so you have plenty of time
to aim the antenna. Slowly turn
and tilt the antenna.The "satellite"
and "terrestrial" signal bars will
9/21/2006
change. Find the position that gives
the strongest signal strength (at
least two bars) on either "satellite"
or "terrestrial. "
4. Once you are convinced you have
determined the proper position to
receive the best possible signal,
press the "menu" button to return
to normal operation.
12:09 PM Page 17
Figure 9. Signal strength indicator.